Open the map

Master plans and residential classes A, B, C and D

A guide from Qushan. Last updated 19 November 2026.

The master plan (المخطط الهيكلي) fixes the use of every piece of land inside the planning boundary: Residential A, B, C or D, commercial, industrial, public buildings and others. The use decides the building rules: number of storeys, setbacks and building ratio. This page explains how Qushan shows the master plan on the map, and gives the guidance building rules for the residential classes. Residential A, B, C and D are zoning classes; they are a different thing from Areas A, B and C.

The Qushan interface is in Arabic. Where this page names a button, layer or section, it gives the Arabic label as it appears on screen, with its meaning in English.

The master plan on the map

Land uses are drawn in the colours adopted by the Ministry of Local Government, matching the approved paper plan, over the aerial image and the parcel boundaries. You can see which use a parcel falls in, and whether an approved street cuts through it.

  1. Open the map and turn on the master plan layer under «الطبقات» (“layers”).
  2. Zoom to where the land is, or find the parcel by block and parcel number.
  3. Tap the parcel and open the section «التنظيم» (“zoning”) of its card: land use, setbacks, number of storeys, maximum built area, and the net area after deducting approved roads.

How Residential A, B, C and D differ

The table below gives the guidance building rules as the Ministry of Local Government publishes them with the approved plans layer, copied as they stood on 15 November 2026.

RuleResidential A سكن أResidential B سكن بResidential C سكن جResidential D سكن دResidential A, high-rise سكن أ مرتفعVilla residential سكن فللRural residential سكن ريفي
Number of storeys5555732
Building height18 m18 m18 m15 m25 m12 m8 m
Front setback5 m5 m4 m3 m5 m5 m12 m
Side setback4 m3 m3 m3 m6 m5 m7 m
Rear setback5 m4 m4 m3 m6 m5 m7 m
Plot coverage36%42%48%52%40%30%10%,300
Floor area ratio180%210%240%260%280%90%20%
Minimum subdivision area1,000 m²750 m²500 m²300 m²1,000 m²700 m²2,500 m²
Minimum frontage length25 m18 m15 m15 m30 m20 m30 m

These rules are guidance, not the binding rule. The table is a general model. The rules in force on your parcel are those of the local authority and its approved plan, and they may differ from it. Check with the municipality or the council before designing or buying. Where the approved plan carries rules specific to the zone, the app shows those in the parcel card instead of this model.

“Minimum subdivision area” is the smallest plot accepted when land in that class is subdivided.

Other uses

The source also publishes guidance rules for other uses, and the app shows them in the parcel card: Public buildings مباني عامة, Agricultural residential سكن زراعي, Linear commercial تجاري طولي, Old town zone منطقة البلدة القديمة, Local commercial تجاري محلي, Commercial showrooms معارض تجارية, Main commercial centre مركز تجاري رئيسي, Secondary commercial centre مركز تجاري فرعي. Some are not given as numbers: the rules of the old town zone, for example, follow the decision of the licensing committee.

Finding land in a given residential class

In «بحث بالمواصفات» (“search by specifications”) you choose the land use and the residential class (A, B, C, D) within a governorate or chosen localities, add area, street width and other conditions, and the app finds the matching parcels. The app shows no land for sale and no prices: it shows where the matching parcels are and what their data is.

Limits of what the app offers

Open the map About the app

Qushan — the parcel data shown is administrative and geometric, and is not a legal record of ownership.